01
2022
-
09
What should you pay attention to in zinc alloy die-casting molds?
Small details in zinc alloy die-casting molds:
1. The basic structure of the die-casting mold, such as the parting surface, cavity placement, casting system, overflow tank and exhaust groove, is confirmed before the zinc alloy die-casting mold.
2. Place the core.
3. Positioning of the die casting
4. Select the orientation and mode of the core, the push rod and the reset lever.
5. Place the cooling system.
6. Confirm the relevant orientation of the fixed and dynamic modes.
However, if the planned zinc alloy die-casting process is reliable, it needs to be determined by die-casting die-casting parts. Therefore, after the die-testing, it is necessary to further verify and analyze the die-casting molding according to the condition of the die-casting parts. , to improve the planning quality and production power of die-casting molds.
1. Whether the die-casting parts produced by die-casting are reliable, and whether the quality of castings after die-casting can satisfy the various skill requirements of the products.
2. Whether the mold is simple, advanced and reasonable. It is not convenient to maintain the mold.
3, summed up the cost of die-casting parts and mold costs and mold maintenance costs, whether it is sufficient to verify the cost.
4. Is the matching between the mold and the die casting machine suitable?
The small details of the zinc alloy die-casting mold can not be easily ignored.
Copyright © 2022 Dongguan Fushuai Hardware Co., Ltd. All rights reserved Technical support: www.300.cn SEO
